• 69 inches long, 12 peg holes for horizontal mounting

• Precision aluminum pegs with rubber grips have precise fit in holes for extra fitness challenge

• More challenging than a standard wood climbing peg board, making it a great ninja and crossfit training tool

• Manufactured from recycled plastic with precision machined holes

• Pegboard will not degrade due to sunlight / moisture if used outside

• Holes spaced at 4 inches for mounting to residential or commercial walls with 16-inch or 24-inch stud spacing

• Mountable to wood planks and concrete walls

• The Horizontal Pegboard is available for direct mount to the MB-1, MB-2, and MB-3 Rigs.

The MG-8 Horizontal Climbing Pegboards provides a challenge for those looking to increase their fitness pegboard skills. It’s manufactured from recycled plastic with a precision-fit between the machined holes ant the aluminum peg. This provides a snug yet low friction interface that requires the climber to have precise movements. The recycled plastic is formulated for use outdoors so it won’t dry rot or crack, and it won’t absorb water so the fit always stays the same.

The MG-8 is a great training tool for crossfitters, ninja warriors, and obstacle racers. It requires significant upper body strength, along with good grip strength and hand eye coordination. The precision fit requires accurate placement. This provides great training and makes regular wood pegboard seem easier.

Check out the MG-9 Fitness Pegboard for a vertical mount pegboard, or a multi-level horizontally mounted pegboard.

Fasteners are not provided. It is the user’s responsibility to select he most appropriate fasteners to safely mount the pegboard to studs. For concrete wall mounting we recommend the usage of 5/16-inch Tapcon screws. For wood plank mounting (1.5-inch thick minimum) we recommend 5/16-inch lag screws. We do not recommend mounting the pegboard greater than 10’ off the ground.